D-MAX LED Tail Light 3-Piece Set, Smoke (S14)
D-MAX LED Tail Light 3-Piece Set, Smoke (S14)
Couldn't load pickup availability
■ Material
| Acrylic resin |
*The lens scratches easily — do not wipe it with a dry cloth.
■ Specifications / Bulb type
| Design | Smoke |
| Turn signal section | Bulb type |
| Turn signal bulb | S25 single / Rating: 12V 21W |
| Tail & stop section | LED type |
| LED count (tail lamp section) | 18 LEDs per side / 36 total |
| Garnish section | Not an LED type. *The garnish section does not function as a tail or brake lamp. |
| Reverse bulb type | S25 single / Rating: 12V 21W (please use the OEM bulb) |
■ Installation
| Uses the OEM connectors. |
*Perform replacement according to the Nissan service manual.。
■ Compatible vehicles / chassis codes
| Silvia early / late model | S14 |
*Lighting such as tail lamps is strictly regulated for color and brightness for safe vehicle operation.
Never modify the color or brightness of the lamps.
*Most water leaks are caused by an improperly installed or deteriorated seal between the body and lamp.
*Please install with a proper understanding of the role of the seal (caulking).
*Before driving, always confirm that all lights work properly.
*After installation, always confirm that all lights work properly. Keep the removed OEM lamps in a safe place.
*If the lens fogs: tail lamps are not sealed so that the air inside can ventilate. This releases heat generated by the lamp
keeps the interior of the lamp in optimal condition.
*The tail lamp interior is not sealed, so condensation may fog the lens during long periods of rain or high humidity. This is normal.
*Fogging will clear if left for a while. If it bothers you, disconnect the tail lamp connector on a sunny day and leave it for a while.
*The seal (caulking) between the body and lamp is a very important part for preventing water leaks.
If it shows wear or damage when removed, always replace it with a new one.
*A gap of a few millimeters between the body and this product after installation is due to body or installation tolerances and is not a defect.
