D-MAX Position Lamp & Turn Signal Set (180SX Late Model)

■ Compatible vehicles / chassis codes

■ Material

*The lens scratches easily — do not wipe it with a dry cloth.
■ Specifications / Bulb

*LED bulbs included (amber)
*Wiring included
■ Installation

*Never use anything other than the supplied LED bulbs and silicone sockets.
*Wiring modification is required to make the turn signals work.
*Perform replacement according to the Nissan service manual.
*Lighting such as tail lamps is strictly regulated for color and brightness for safe vehicle operation.
Never modify the color or brightness of the lamps.
*Most water leaks are caused by an improperly installed or deteriorated seal between the body and lamp.
*Please install with a proper understanding of the role of the seal (caulking).
*Before driving, always confirm that all lights work properly.
*After installation, always confirm that all lights work properly. Keep the removed OEM lamps in a safe place.
*If the lens fogs: tail lamps are not sealed so that the air inside can ventilate. This releases heat generated by the lamp
keeps the interior of the lamp in optimal condition.
*The tail lamp interior is not sealed, so condensation may fog the lens during long periods of rain or high humidity. This is normal.
*Fogging will clear if left for a while. If it bothers you, disconnect the tail lamp connector on a sunny day and leave it for a while.
*The seal (caulking) between the body and lamp is a very important part for preventing water leaks. If it shows wear or damage when removed,
Always replace with a new one.
*A gap of a few millimeters between the body and this product after installation is due to body or installation tolerances and is not a defect.